In addition to its work in the passive safety development activities, CSI is also active in the passive safety field and road safety development.
CSI offers services on road restraint system (barriers, parapets, terminals, shock dampers) under the standards EN 1317, AASHTO MASH Standard, GOST 33129-14 and JTG B05-13, on motorcycles under the CEN/TS17342 standard, on support structures under the standard EN12767, on road safety bollards under the BSI PAS68, IWA 14, ASTM F2656 standard, on safety networks under the ASTM 2781 standard, on noise barriers under the standard EN14388.
With 4 equipped areas on the track, it is possible to carry out test on different support (terrain, asphalt) with different speeds and impact angles.
Also, it is possible to carry out supporting test like pull-push on pole, simplified impact test with mule and/or sensored dummy, strength gauge detection and load cells of the stress transferred on impact from the device at the end and base anchorages, dynamic pull-out of anchors.
For the smart road, offers a protected environment for testing on tracks on ITS of V2I, V2V and I2X type. In particular, the laboratory is accredited and does check on OBU (On Board Unit) and RSE (Roadside Equipment) following the European Directive 2004/52/EC (EETS) and on all the radio devices following the European Directive 2014/53/UE (RED), with the specialist contribution of IMQ, a company of the IMQ Group. Besides, it is possible to do ADAS tests and tests on road with autonomous vehicles with experiences specialists.
All these services are indeed integrated, managed by a professional and high specialized team, careful to the needs induced by timing time-to-market, often of central importance of the Clients.